Impact-Resistant Windows / Hurricane Preparedness

After a Quiet Hurricane Season, Is Now the Best Time to Install Impact Windows?

In This Article
Free Quote
Ready to Protect Your Home?

Free in-home estimates from our own installers.

The best time to install impact windows in Florida is the dry season, roughly November through May. Installs go smoother with less rain, there is time for custom manufacturing and permits before June 1, and you are not competing with the rush of homeowners who wait for a storm in the forecast. After the unusually quiet 2026 hurricane season, the next few months are the calmest window you will get.

That last point matters more than it sounds. A quiet season makes it easy to put the project off another year. This guide explains what actually happened in 2026, why the off-season is the smart time to act, how long an impact window project takes, and the programs that can lower your cost right now.

What Made the 2026 Hurricane Season So Quiet?

Bright Florida living room with large impact windows on a dry winter morning, the best time to install impact windows
Illustrative image. Dry, mild winter days make for smoother installs.

The 2026 Atlantic season produced 10 named storms and only one hurricane, according to AccuWeather. That was the first season since 1925 with a single hurricane, and Isaias did not form until October, the latest first hurricane in more than a century. Forecasters credit a strengthening El Niño, which increased wind shear and dry air over the tropical Atlantic.

Florida still did not get a free pass. Isaias made landfall near Destin on the Panhandle on October 9 as a Category 2 hurricane, a reminder that one storm is all it takes. The official season still runs through November 30.

Here is the part that gets lost: a quiet year is not a forecast for next year. El Niño patterns come and go, and the 2027 outlook will not be published until spring. Florida’s history is full of calm seasons followed by destructive ones. The homes that come through a bad year in good shape are usually the ones that were prepared during a good one.

5 Reasons the Dry Season Is the Best Time to Install Impact Windows

Dry season (Nov to May)Hurricane season (Jun to Nov)
Rain delaysFewerDaily afternoon storms common
SchedulingMore flexibilityBusiest when a storm is forecast
Time before June 1Room for manufacturing and permitsAlready in season

1. Better weather for the install itself

Replacing a window means an opening in your wall, even if only for a few hours. Tampa Bay’s afternoon storms are most frequent in summer, so dry season installs face fewer rain delays and less risk of water getting into the opening. Cooler, less humid days are also easier on the sealants and on everyone working on your home, including you.

2. Time for custom manufacturing before June 1

Close-up of an impact window frame and laminated glass edge
Illustrative image. Every impact window is built to order for its opening.

Impact windows are not pulled off a shelf. Each one is built to order for a specific opening, with a frame, glass package and design pressure rating that match your home. Between measuring, manufacturing and delivery, a project takes weeks, not days. Starting in the dry season gives your order time to move through production so your home is protected before the next season starts.

3. Permits and inspections move on a calmer calendar

Impact window replacement in Florida requires a permit, and the windows must carry a Florida Product Approval or Miami-Dade NOA that matches each opening. Storm Pro pulls the permit and schedules the final inspection for you. Doing that in winter or spring avoids the late-summer surge, when homeowners who waited start calling all at once. See our guide to impact window permits and building code for what the permit covers.

4. Your insurance discount can be in place before renewal

Under Florida law, insurers must offer premium discounts for verified wind mitigation features, and impact-rated opening protection is one of the most valuable. The discount is not automatic. You need a wind mitigation inspection documented on the state’s OIR-B1-1802 form, which was updated effective April 1, 2026. Finishing the project early leaves time to schedule that inspection and send the report to your agent before your policy renews. Our wind mitigation insurance discounts page walks through the process.

5. Savings programs are open right now

Florida’s home hardening sales tax refund covers qualifying purchases from July 1, 2026 through June 30, 2029, and the My Safe Florida Home program has opened and closed quickly as funding comes and goes. Being ready when a program opens, rather than scrambling after a storm, puts you first in line. More on both below.

How Long Does an Impact Window Project Take?

Installers setting a new impact window into an opening inside a Florida home
Illustrative image. The install is the fastest part of the project.

From first visit to final inspection, a typical project follows four steps:

  1. Consultation. We walk your home with you, talk through styles, frames and glass, and note any openings that need special attention.
  2. Measure. Every opening is measured in person so each window and door is built to fit.
  3. Permit and order. We pull the permit with the correct product approvals and place your order with the manufacturer.
  4. Install. Our in-house crews remove the old units and install the new ones opening by opening, so your home is never left open overnight. Then we schedule the final inspection.

Most of the elapsed time sits in steps 3 and 4: manufacturing and permit review. That is exactly why starting in the off-season matters. If you sign in April, you are cutting it close to June. If you sign in December or January, you have room to breathe.

Storm Pro uses in-house installers only, never subcontractors, with more than 50 years of combined window and door experience. The people who measure your home are the same company that installs it. Learn more on our impact window installation page.

Should You Replace Every Window at Once or a Few at a Time?

Phasing a project over a few years can make the budget easier, and sometimes it is the right call. But know the trade-offs before you split it up:

  • Protection. A home is only as strong as its weakest opening. If one unprotected window or slider breaks, wind can pressurize the house from inside.
  • Insurance. The strongest opening protection credit on the wind mitigation form generally requires every glazed opening to be protected. A partial project may not earn that credit until the last window is done.
  • Cost per window. Setup, permitting and delivery costs spread across more openings on a single project.
  • Appearance. One project means matching frames, glass tint and grids throughout the house.

If you do phase it, start with the openings that face the prevailing wind and the largest glass, like the patio slider. Our whole-home impact window replacement page covers the full-house approach in detail.

Ways to Lower the Cost This Season

Home office overlooking a pool through impact windows, planning impact window savings programs
Illustrative image. Line up the paperwork before you sign.
ProgramWhat it doesKey detail
Florida home hardening sales tax refundRefunds Florida sales tax paid on qualifying impact windows, doors and garage doorsUp to $500, homestead homes with a just value of $700,000 or less, purchases July 1, 2026 through June 30, 2029
Wind mitigation insurance creditLowers the windstorm portion of your premiumRequires a current OIR-B1-1802 inspection report
My Safe Florida HomeFree inspection and matching grants for eligible homeownersIncome-based priority; funding opens and closes
FinancingSpreads the cost over time0% options with approved credit, plus PACE
  • Sales tax refund. The Florida Department of Revenue’s Form DR-26HH lays out the rules: a maximum $500 refund for one site-built homestead with a just value of $700,000 or less. There is an important nuance when one contractor supplies and installs your windows, which changes who pays the tax. Our impact window sales tax refund guide explains it step by step.
  • My Safe Florida Home. The program offers free wind mitigation inspections and grants of up to $10,000 for eligible homeowners, with priority for low and moderate income households. In past cycles, funding has run out within weeks of opening, so check the current status at the official program site and see our My Safe Florida Home page before you plan around it.
  • Financing. 0% financing is available with approved credit, and PACE financing lets some homeowners repay through their property tax bill. See financing options.

One thing that is no longer available: the federal energy efficient home improvement credit (Section 25C) ended for windows installed after December 31, 2025. If a salesperson mentions a federal tax credit for 2026 windows, ask them to show you the current IRS rule.

What Does an Impact Window Project Cost?

Every quote depends on the number and size of openings, window styles, frame material, glass package and the design pressure your home requires. As a public benchmark, the My Safe Florida Home program has listed an average of $900 to $1,750 per impact window for a typical 1,750 square foot Florida home. Most whole-home projects with Storm Pro run $25,000 and up. Our impact window cost guide breaks down the 12 factors that move the price.

The Impact Windows and Doors We Install

Winter is also a good time to compare products without pressure. Storm Pro installs impact windows and sliding glass doors from CWS (Custom Window Systems), PGT, Eastern Architectural Systems, JELD-WEN and Viwinco, plus impact entry doors from Therma-Tru, Plastpro and Neuma Doors. Each line has its own strengths in frame material, glass options, sizes and styles, and all carry Florida product approvals for the openings we install them in.

Want to see how they compare? Our impact window and door brands guide covers what each manufacturer is known for. For official storm history and next season’s outlooks, the National Hurricane Center is the most reliable source.

Frequently Asked Questions

What is the best month to install impact windows in Florida?

Any month from November through April is ideal. You avoid the rainy season, and there is time for manufacturing, permits and inspection before hurricane season starts June 1.

Can impact windows be installed during hurricane season?

Yes. Installs happen year-round, and openings are closed the same day. The risk is timing: if a storm threatens while your windows are still in production, you will need your old protection plan for that storm.

Does a quiet hurricane season mean next year will be quiet too?

No. 2026 was quiet largely because of El Niño, and those conditions change from year to year. Seasonal outlooks for 2027 will not come out until spring.

How long do impact windows take to install?

The install itself is usually the quickest part of the project. Most of the timeline is custom manufacturing and permit review, which together take several weeks.

Do I still need shutters if I install impact windows?

No. Impact windows are tested to resist wind-borne debris on their own, so you do not need to put up shutters before a storm. See impact windows vs. hurricane shutters.

Get on the Schedule While It Is Calm

Storm Pro Window and Door is a family-owned impact window and door company in Tarpon Springs, serving Pinellas, Pasco, Hillsborough and Hernando counties. Visit our Tarpon Springs showroom to see frames, glass and door finishes in person, or request a free in-home quote and we will measure every opening and give you an itemized proposal. You can also call (813) 749-6051.

Storm Pro installer sealing a new impact-resistant bay window during installation

Family Owned. Expertly Installed.

In-House Installation. A Higher Standard.

With 50+ years of combined experience, our family-owned team handles every installation with care. No subcontractors. Just skilled professionals who take pride in a job well done.

Family-Owned and Operated
In-House Installers, No Subcontractors
50+ Years of Combined Experience
Keep Reading

Related Articles

See the Difference

Real Projects. Real Results.

Custom windows and doors installed across Tampa Bay and Southwest Florida.

Two Convenient Showrooms

Our Locations

Visit us at either of our showroom locations serving the Greater Tampa Bay area and Southwest Florida.

Tarpon Springs

40345 US Highway 19 North Tarpon Springs, FL 34689

Fort Myers

13031 McGregor Blvd, Suite 17 Fort Myers, FL 33919